Vandy Vape Pulse AIO.5 Kit

Vandy Vape Pulse AIO.5 Kit

 Vandy Vape Pulse AIO.5 is the 2nd iteration of the popular Pulse AIO Kit. This version essentially works just the same as the previous version, it just has updated the button from round to square and they have fixed the complaint to do with the top 510. The Vandy Vape Pulse AIO.5 is compatible with all previous accessories – it accepts both a 3.7ml Vessel RBA tank and a 5ml Vessel Pre-built tank.

The Vessel DIY RBA tank features a curved 180-degree airflow and Vessel Pre-built tank fit for all VVC coils.And, this all-in-one setup also features 80 watts by a single 21700/20700/18650 battery, a USB-C charging port, customizable buttons and plates, a high number of coil options, a multitude of safety protections, and a plethora of modes including temperature, voltage, variable wattage, and bypass.

**Pulse Vessel kit found here
**Pulse Empty Replacement Pod Kit found here
** Vape VVC Replacement Coils found here
**Vandy Vape Replacement Button Rings found here
**Batteries for your device are found here
**Wick and Wire for your vessel rba are found here

Features and Specs:

• Dimensions: 55.6 x 97.5 x 28.2mm
• Capacity:
  • RBA Pod 3.7ml
  • Pre Built Pod 5ml
• Battery: Single 21700/20700/18650 not included
• Wattage Range: 5 – 80W
• Resistance Range: 0.05 – 3.0ohm
• Operating Voltage: 3.2 – 4.2V
• Charging Input Voltage: 5V (+/- 0.25V)
• Charging Current: 1000mAh
• Maximum Output Current 32A
• Updated frame, with metal interface for the 510 nut
• New square button and matching panel
• Included round button and matching inner panel
• All previous accessories and aftermarket accessories compatible
• Adjustable positive pin
• Multiple modes including Bypass, Smart, and TC

This Kit Comes With:

• 1 x Vandy Vape Pulse AIO.5 Device
• 1 x Pulse Vessel RBA Pod
• 1 x Pulse Vessel Pre Built Pod
• 2 x VVC Coils
• 2 x 24g Ni80 0.4ohm Coils
• 1 x Coil Lead Guide
• 1 x Type-C USB Cable
• 1 x Accessories Bag
• 1 x Wrench
• 1 x 18650 Battery Adaptor
• 1 x Round Button Set and Inner Panel

ATTENTION: For ADVANCED USERS ONLY, with a knowledge of Ohm’s Law and Battery safety, only use quality hi-amp batteries.

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

USAGE WARNING!
1- This is an advanced Item. Please use at your own risk and always use proper precautions and handling. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance.
2- We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
3- Please note that we do not recommend using the built-in USB charging feature on mods that use replaceable lithium ion cells. Lithium ion batteries must be balance charged using a good quality external battery charger to avoid damaging the cells and to reduce the risk of venting. Micro and mini USB ports are notoriously fragile and as such we do not offer a warranty on any USB charging ports if you choose to ignore this warning.
4 – This product is for advanced users only. There is a risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have researched  this product and how to use it before purchasing.
5 – We strongly recommend testing the coils with a ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Australian Vaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.