Packet Includes:
The Nevoks Feelin A1 pods mark a significant step forward in pod kits. These replacement pods prioritize an optimal experience through innovative, leak-proof design. Equipped with advanced built-in mesh coils, they heat up faster for incredible flavour.
The pods offer full airflow control with four inlets at the base. The Nevoks A1 range includes options for direct lung, restricted direct lung, and MTL vaping. Paired with the Nevoks Feelin A1 pod device, these 3ml pods ensure robust flavour and impressive vapour production.
Available Resistances:
Nevoks A1 Pods are compatible with:
Package Contents:
This product does NOT contain nicotine
**If you properly prime your coils before use the manufacturer states that you can expect to see up to 7-16 days of usage out of one pod. Remember to let your pods prime for 3-5 minutes after filling with e-juice.
USAGE WARNING!
You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
Due to the nature of this product, there is no warranty.
]]>The SMOK RPM Coils offer rapid ramp-up, smooth operation and exceptional flavour with their sophisticated design! Keep your Smok devices running at peak performance with RPM Replacement Coils.
The coils in this series includes a range of resistance (ohm) options so you can vape the way you like (high or low wattage) with your favourite compatible vaporiser. These RPM Coils are designed to be used with the following SMOK vape kits:
Packet Includes:
USAGE WARNING!
1- – You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
2- This product is for experienced users and requires technical knowledge in order to properly use it.
3- Due to the nature of this product there is no warranty.
Uwell Crown V (5) Replacement Coils are compatible only with the Uwell Crown V (5) Subohm Tank.
They are NOT compatible with any other Uwell Crown Tank.
Specs:
What’s in the box:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- This product is for experienced users and requires technical knowledge in order to properly use it.
4- Due to the nature of this product there is no warranty.
The A”High”OLien. AKA High Resistance Game Over Man BB edition. This is my recipe for the perfect RBA bridge or single coil RTA application. Are they going to be your “Snailien”? Your “ExoTereastrial”? Whatever the application these will have you punching dense clouds.
Specs:
What’s in the box:
The AI”Low”Lien. AKA Low Resistance Game Over Man BB edition. This is my recipe for the perfect RBA bridge or single coil RTA application. Are they going to be your “Snailien”? Your “ExoTereastrial”? Whatever the application these will have you punching dense clouds.
Specs:
The ZF Coil is the new coil for the DL&RDL Innokin Z Force Tank.
The new DuoPrime ZF coil platform fundamentally changes coil design. The second layer of mesh is embedded in the wick, which heats up slowly. This massively increases wicking action, resulting in better flavour, denser vapour, and improved coil longevity.
Innokin ZF Replacement Coils are compatible with Innokin Z Force Subohm Tank and Innokin Kroma 217 Z Force Kit only.
Specs:
Compatible with:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>The Voopoo VMate V2 Replacement Pods are disposable,but refillable pod cartridges with 3mL vape juice capacity that conveniently suit a number of VooPoo pod vape kits. Get a flavoursome, tight to loose mouth-to-lung (MTL) draw (cigarette-style draw) with these innovative leak-resistant, antibacterial, light-reflecting VooPoo VMate V2 Pod Cartridges.
VMate Pods are compatible with:
VooPoo made sure your lips were comfortable while vaping with the perfect, duck-billed VooPoo Vmate Pod Mouthpiece that had 128 engineer tests. It’s not the only genius feature of the VMate pod though, others include its:
FEATURES & SPECS:
Package Contents:
This product does NOT contain nicotine
**If you properly prime your coils before use the manufacturer states that you can expect to see up to 7-16 days of usage out of one pod. Remember to let your pods prime for 3-5 minutes after filling with e-juice.
USAGE WARNING!
You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
Due to the nature of this product, there is no warranty.
]]>With the explosion of certain “billet construction” devices recently, Andy from Cloud Rev thought it’d be a great idea to custom build some coils for these tiny, flavourful bridges. As usual, he’s nailed it and we’re proud to present Aioliens to you! Excellent in any single coil or RBA section application.
Specs:
What’s in the box:
]]>
These Coils are compatible with the Vandy Vape Pulse AIO and Pulse AIO.5.
There are different coil options available so you’ll find options suitable for both MTL and direct lung vaping experiences.
With that said, they can be used with any kind of vape juice, including regular freebase and salt nics. All the coils feature a mesh coil design with 100% organic cotton. This means awesome flavour, and they’ll last a long time too!
They are also compatble with:
AVAILABLE RESISTANCES:
What’s in the box:
USAGE WARNING!
1- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
2- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Utilizing bamboo cotton, the Aquila coils offer you a clean, pure and consistent vaping experience. Bamboo is more absorbent and contains antimicrobial properties to maintain coil stability. Offering a brilliant blend of vapour production and intense flavour accuracy, the Horizon Aquila Replacement Coil have been meticulously engineered for excellent fit and function when used with the HorizonTech Aquila Tank.
Utilizing the unique combination of bamboo pulp and cotton as the wicking material, the life of the coil is prolonged and ensures high quality flavour. The mesh coil structure is designed to heat from the bottom up, forcing vapour to compress upwards resulting in smooth dense vapour.
AVAILABLE RESISTANCES:
E2 DUAL MESH COIL – The E2 Coil is designed with an encircle dual mesh coil structure to enhance its core control level to produce more clouds and flavour. It utilizes organic bamboo cotton for a clean, pure, and consistent vaping experience.
P4 QUADRUPLE MESH COIL – The P4 Quadruple Mesh Coil features a parallel structure with 4 slices of individual mesh pieces and a closed loop tube structure aiming to improve the contact area between coil and e-liquid.
Features & Specs:
Packet Includes:
NOTE: These coils require priming before using. The organic cotton around the coil must be fully saturated before vaping. Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
These coils are specially-designed for direct-lung (DL) vaping (where you inhale vapour straight to the lungs), consisting of high-wattage, low resistance mesh coils that’ll bring great vapour, flavour and large vape clouds!
With their mesh lattice coil structure, your e-liquid heats up faster and you’ll experience a fuller flavour.
Features:
AVAILABLE RESISTANCES:
Compatibilty:
Take note of your device’s compatible resistance range before purchasing. AVS does not take responsibility for coils that do not fire in your device due to too low of a resistance.
As atomiser coils are a consumable item they do not carry a warranty.
]]>The SMOK RPM 3 Coils offer rapid ramp-up, smooth operation, massive vapour production and exceptional flavour with their sophisticated mesh core design! These coils also feature thread-less installation, and an anti-leak design. Keep your Smok devices running at peak performance with RPM 3 Replacement Coils.
0.23 Ohm
– 20 45W
– Even Heat Surface
– Smo0th Taste & Flavour
– Mid Wattage Restricted DL Vaping
0.15 Ohm
– 40-80W
– Fast Ramp Up Time
– Best Flavour and Vapour Production
– High-wattage DL vaping
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- This product is for experienced users and requires technical knowledge in order to properly use it.
4- Due to the nature of this product there is no warranty.
The Luxe X Replacement Pods by Vaporesso are specially designed for the Vaporesso Luxe X Pod Vape Kit. The 5mL vape juice capacity, disposable Vaporesso Luxe X Pods are made with Corex Technology that enhances vapour flavour and prolongs the pod’s life. Luxe X Pods comes in different resistances and airflow to suit either mouth-to-lung (MTL) or direct-lung (DL) vaping.
Even though the Vaporesso Luxe X Replacement Pod is disposable, it can still last you a while because you essentially keep refilling it until the coil reaches the end of its life. You’ll know when to replace your Luxe X Pod if you experience bad vapour flavour, little to no vape clouds, slow firing or excessive gurgling (to name a few). More convenient facts about the Luxe X Pod include:
Features and Specs:
Package Contains:
**Remember to let your pods prime for 3-5 minutes after filling with e-juice. Never let your pod or tank run too low or empty. This will ensure the best coil life.
Due to the nature of this product, there is no warranty.
]]>Compatible With:
For OFRF nexMesh compatible with the above list, click here.
For nexMesh compatible WITH the Profile 1.5 RDA and Profile RDTA, click here.
This nexMesh may also be compatible with other mesh atomisers, however please take note your atomiser may require a certain size of mesh piece. If in doubt, do not purchase.
nexMesh Clapton S:
Classic Wotofo Mesh 0.18ohm:
Wotofo Mesh A1 0.3ohm(NEW)
Package Contains:
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
As atomiser coils are a consumable item they do not carry a warranty.
]]>The mesh in this listing is EXCLUSIVELY compatible with the Profile 1.5 RDA and Profile RDTA, due to it being 1.4 times larger than original nexMesh.
Wotofo, the creators of OFRF and the legendary NexMesh coils, have released a bunch of coil styles (mesh strips) for the new Wotofo Profile V1.5 RDA! These are nexMESH CHILL, nexMESH TURBO, nexMESH EXTREME, and nexMESH CLAPTON. These coils have been tried and tested time and again to ensure the best results.
**These are NOT compatible with the original Profile RDA, Unity RTA, and Profile M RTA.
For Wotofo nexMesh that will fit the Profile RDA, Profile Unity RTA and Profil M RTA, products, click here and for OFRF’s nexMesh offering, click here.
This nexMesh may also be compatible with other mesh atomisers, however please take note your atomiser may require a certain size of mesh piece. If in doubt, do not purchase.
Specs:
Available Resistances:
NexMesh Extreme
NexMesh Turbo
NexMesh Chill
NexMesh Clapton
Package Contains:
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
As atomiser coils are a consumable item they do not carry a warranty.
]]>These vape cartridges are specially designed for the GeekVape Wenax H1 Pod Kits
The GeekVape Wenax H1 Pods comes in two options – 1.4ohm or a 0.7ohm resistance. The higher resistance 1.4 ohm pod will be slightly gentler with less vapour than the 0.7ohm pod.
These pods feature a 2.5ml refillable capacity.
Geekvape Wenax H1 Replacement Pods are compatible only with the Geekvape Wenax H1 Pod Starter Kit.
Features and Specs:
Available Resistances:
Package Contains:
**Remember to let your pods prime for 3-5 minutes after filling with e-juice. Never let your pod or tank run too low or empty. This will ensure the best coil life.
Due to the nature of this product, there is no warranty.
]]>Aegis Boost 2 B60 Replacement Pod by GeekVape are large, 5mL vape e-liquid capacity pods, capable of delivering both mouth-to-lung (MTL) and direct-lung (DL) vaping with their built-in, top adjustable airflow lever! Geek Vape Aegis Boost 2 B60 Pods do this successfully through their compatible Geek Vape B Series Coils (not included) who are responsible for the tasty vapour flavour and surprisingly large vape clouds you’ll experience too! This is an empty pod for when your pod on your Geekvappe Boost 2 B60 Kit needs replacing.
Compatible with:
It is NOT compatible with any other Geekvape Boost devices.
Specs:
What’s in the box:
**Remember to let your pods/ coils prime for 10 minutes after filling with e-juice. Never let your pod or tank run too low or empty. This will ensure the best coil life.
]]>Get intense flavour from your vape with these OFRF nexMesh strips,
The authentic nexMESH Strip Coil is 3 x as dense as the Wotofo Mesh Style Coil. These mesh strips feature a unique triple density mesh netting with 3 x more holes than your regular mesh for quick heating, thicker vapour and intense flavour. The nexMesh also utilises a micro-weave netting to reduce spit back.
The lower 0.13ohm resistance supports higher wattage devices, perfect for sub ohm vaping. The uniform mesh weave with 3x more holes delivers rapid power transfer for lightening fast heating. The unique triple density mesh maximises heating surface area to deliver thicker vapour and intense flavour. While the e-juice spit-back situation is significantly decreased.
Unique triple density mesh netting maximises heating surface area to deliver thicker vapour and intense flavour.
Uniform mesh weave with 3 times more holes than standard mesh delivers rapid power transfer for lightning fast heating.
Enhance your experience and reduce spit back with nexMesh’s unique micro weave netting.
Designed for sub-ohm vaping, nexMesh delivers 0.13 low ohm resistance to support higher wattage devices.
Compatibility:
Specs:
Package Contains:
10 x OFRF NextMesh Strips
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
As atomiser coils are a consumable item they do not carry a warranty.
]]>The Freemax Marvos RTA Pod Tank is a rebuildable pod designed for all Marvos series products. It is a marvelous Mesh RTA option, featuring side & top airflow control to help you customize the airflow you want exactly. A replaceable 810 drip tip is added to fit DTL vaping needs, and there is a v-shaped groove at the edge of the 810 drip tip to prevent spitback and reduce leaking.
The Marvos RTA Pod is not only compatible with all Marvos Kits, but also with replaceable mesh coil and DIY wires. With a spring-loaded ceramic block in the deck, it can support cotton and guarantee full contact between cotton and mesh coil. Featuring bottom filling system and 3.5ml e-juice capacity, it is super easy and convenient to refill. In addition, strong magnets make the Marvos RTA Pod fit into the mod quickly and perfectly.
FEATURES:
1. First rebuildable pod of Freemax for Marvos series products
2. Two-side & top airflow control
3. Replaceable 810 drip tip for DTL vaping needs
4. V-shaped groove design at the edge of the 810 drip tip
5. Compatible with both replaceable mesh coil and DIY wires
6. A spring-loaded ceramic block to support the cotton
7. Twist-lock design for building easily
8. 3.5ml e-liquid capacity, bottom refill system
9. Strong magnets guarantee quick and perfect match with the mod
Compatible with :
Specs:
PACKET INCLUDES:
Due to the nature of this product there is no warranty.
The Freemax Marvos Pod Tank utilizes the Freemax MS Mesh Coils for unbelievable flavour. The material of the tank is equipped with High End Borosilicate Glass. This type of glass avoids cracking under extreme temperature changes.
Compatible with :
Specs:
PACKET INCLUDES:
Due to the nature of this product there is no warranty.
This is a 4 Pack of genuine Uwell Caliburn A2 / Caliburn AK2 refillable Pods. These will work for both the Uwell Caliburn A2 pod system, or the Uwell Caliburn AK2 Pod system. Each pod has a 2ml capacity for your favourite ejuice and comes fitted with a 0.9ohm integrated coil that Uwell has designed to wick exceptionally well. Wait till you see the quick top fill the Caliburn A2 Pods have!
The Uwell Caliburn A2 Pods pop! The mouth piece ingeniously pops off with a slight push, that can be done with one hand, while the pod is still in the Caliburn A2 or Caliburn AK2 Battery! Underneath is your easy, top fill port hole for your e-liquid.
Features & Specs:
Packet Includes:
**These pods are designed and will only work in conjunction with the Uwell Caliburn A2 / Caliburn AK2 Pod Systems.
**If you properly prime your coils before use the manufacturer states that you can expect to see up to 7-16 days of usage out of one pod. Remember to let your pods prime for 3-5 minutes after filling with e-juice.
USAGE WARNING!
You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
Due to the nature of this product, there is no warranty.
]]>The Valyrian 3 Mesh Sub-Ohm Tank uses Uwell’s UN2 mesh coil technology which has a larger heating surface and heats evenly for maximum efficiency. This coil structure uses highly innovative performance tech, and is designed for optimal e-liquid flow and allows faster ramp-up speed.
AVAILABLE RESISTANCES:
What’s in the box:
Please note: these are only compatible with the Valyrian 3 Tank.
Other Coils compatible with the Valyrian 3 are the :
– Valyrian 2 coils; FeCrAl 0.15ohm (Quad) , FeCrAl 0.16oh m (Triple)
Find them here
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
The Freemax Marvos DTL Empty Pod utilizes Freemax Patented MS Mesh Coil Technology, which is inspired from Freemax world-known Fireluke product line. Moreover, the Marvos DTL Empty Pod adopts industry-leading mesh coil technology FM COILTECH4.0 for best flavor. Compatible with Freemax MS Mesh Coil.
Freemax Marvos Replacement Pods are compatible with the Freemax Marvos T, Marvo 80w Pod Mod Kit, Marvos 60W, and Marvos S Pod Mod Kits.
Specs:
DTL Pod :
Glass DTL Pod :
What’s in the box:
PACKET INCLUDES:
**Coils NOT included
Due to the nature of this product there is no warranty.
The Freemax MS Mesh coils are made with tea cotton fibre ensuring fantastic flavours and big clouds. They are compatible with the Freemax Marvos T 80W, Marvos 60W, Marvos 80W and Marvos S Pod Mod Kits.
Specs:
What’s in the box:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
These vape cartridges are specially designed for the GeekVape Wenax K1 & K1 Series 2 Pod Kits.
The GeekVape Wenax K1 Pod comes in two options – 1.2ohm and 0.8ohm resistances for satisfying your different vaping needs. The higher resistance 1.2 ohm pod will be slightly genteler with less vapour than the 0.8ohm pod.
These pods feature a 2ml refillable capacity.
Geekvape Wenax K1 Replacement Pods are compatible only with the Geekvape Wenax K1 Pod Starter Kit.
They are NOT compatible with the original Wenax Stylus or Wenax C1.
Features and Specs:
Available Resistances:
Package Contains:
**Remember to let your pods prime for 3-5 minutes after filling with e-juice. Never let your pod or tank run too low or empty. This will ensure the best coil life.
Due to the nature of this product, there is no warranty.
]]>The Geekvape Aegis Boost Replacement Coils are available in five different variations to suit every vaper- 0.2ohm, 0.3ohm, 0.4ohm, 0.6ohm and 1.2ohm for your selection. These coils can be used across numerous tanks and kits in the Geekvape lineup. These coils along with all Geekvape coils are known for their flavour and performance.
AVAILABLE RESISTANCES:
Geekvape B-Coil Replacement Coils are compatible with the following devices and atomisers:
What’s in the box:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
…have been specially crafted to use in conjunction with the Horizon Sakerz Tank and the Horizon Sakerz Master Tank for DTL (Direct To Lung) vaping. There are now 3 different coils in the range, the 0.16 Ohm mesh coil, the 0.17 Ohm 2-in-1 coil, and the NEW 0.4 Ohm Coil.
Both variants are mesh coils that have a larger surface area that heats e-liquid faster, delivering a seriously flavour-driven experience. The coils operate best at around 70W. Within this power range, they can produce large amounts of vapour. For best results, we recommend pairing the coils with a 70% VG or higher e-liquid. with each coil crafted of different materials for a customized experience.
When it comes to replacing the coils, they feature a threadless press-fit system that reduces the risk of e-liquid leaking out of the tank during the changeover.
Available Resistances:
Features & Specs:
Packet Includes:
NOTE: These coils require priming before using. The organic cotton around the coil must be fully saturated before vaping. Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
Wanting something with a bit more surface area, maybe even a little less resistance than your regular aliens? These stapled coils from Cloud Revolution are the way to go!
Staples are produced differently from an alien coil, instead of the de-cored clapton wrapped around multiple strands of core wire, the wrap is a single high guage of wire that is wrapped around many ribbon wire cores. This results in even higher surface area, and flavour that’s off the heckin’ chain.
Framed staples take it a bit further, still made like a staple but with the added ‘claptonisation’ of a large guage of round wire and finally claptoned across the top with a further thin guage. Fraliens as you might have guessed are a sweet blend of framing and alien-ing!
Sounds like a lot of work right? Well, no need for all that with Cloud Revolution on the case. These coils are handmade in Australia, just up the road from our Melbourne warehouse, and made with Sandvik (or equivalent quality) wire to ensure purity of the highest degree.
We’d recommend trying a set for yourself over your next multipack of China wire, and getting the six months of use we get off one set! Keep them nice and clean with a dry burn and rinse once a week, and you’ll find these work out cheaper over time!
Framed Staples:
The lovechild of fused claptons and stapled coils, these bad boys are a customer favourite!
Staple Coils:
Designed to make the jump from subohm tanks to rebuildables that much easier.
Do not add extra wraps on these. They have no frame to keep the ribbon in place and the ribbon stack is prone to collapsing if extra wraps are added.
Fralien 2X700:
Designed for single 20700 / 21700 mechanical mods.
Do not remove extra wraps on these coils, as it will make ANY dual coil build way too low for a mechanical device. Stay safe.
Original Fraliens:
All the benefits of an alien and a staple smashed together in a gorgeous package! Less rowdy, more flavour is the motto here.
Flavliens
More cores, more flavour. They ain’t starting with ‘flav’ for nothing.
What’s in the box:
]]>
These claptons might seem basic compared to Andy’s other offerings, but let us tell you: looks truly are deceiving. If you’re wanting a lower wattage experience and aren’t fussed about how Insta-ready your coils look, STs kick butt.
Claptons themselves are constructed by wrapping two or more ‘core’ pieces of lower gauge wire with a single strand of higher gauge wire. This here is a basic technique for most, but absolutely perfected by the man himself for consistent quality in every vape.
Sounds like a lot of work right? Well, no need for all that with Cloud Revolution on the case. These coils are handmade in Australia with Sandvik (or equivalent quality) wire to ensure purity of the highest degree.
We’d recommend trying a set for yourself over your next multipack of China wire, and getting the six months of use we get off one set! Keep them nice and clean with a dry burn and rinse once a week, and you’ll find these work out cheaper over time!
Steam Train Series
Steam Train 24
Steam Train 26
Steam Train MTL – 1.2ohm
What’s in the box:
]]>
Looking for some coils for a mouth to lung or restricted direct lung device? Look no further than the Game Over MTL Alien Coils from Cloud Revolution.
Handmade from authentic high grade Sandvik wire, these coils are ideal for MTL atomisers, low wattage builds or even pod mod RBA sections.
Game Over Man MTL 0.5 ohm
Game Over Man MTL 0.7 ohm
Game Over Man MTL 0.9 ohm
What’s in the box:
]]>
If you’re looking for a high performance RDA build that hits like a freight train and will never let you down, the Game Over Man! Alien Fused Clapton series from Cloud Revolution is here to make all your dreams come true.
Handmade from authentic high grade Sandvik wire here in Australia, these coils are ideal for dual battery parallel mechanical and unregulated mods and high wattage regulated box mods.
There are a few options to pick from and each variant in the line has its own unique characteristics. Check them out:
Game Over Man Alien Original
Game Over Man Alien Dual 24
Game Over Man Alien Dual 26
Game Over Man Alien Triple 27
Game Over Man Alien Triple 28
Game Over Man 3.5
Series Game Over Man
Game Over Man SS316L
Game Over Man Quad 27
Game Over Man Triple 30 (Standard)
What’s in the box:
With the New GTX 2 Coils, Vaporesso have updated their coil structure to ensure leaking is no longer possible. Same great flavour, same compatibility, now completely free of leaks. All Vaporesso GTX coils are made from the highest Nichrome element mesh wrapped with pure spun flax and organic cotton wicking blend providing you with brilliant performance and flavour.
Features:
These coils are compatible with the following Vaporesso products:
**Purchase the original 0.6ohm GTX coils for your Gen nano or GTX Tank 22 here.
Take note of your device’s compatible resistance range before purchasing. AVS does not take responsibility for coils that do not fire in your device due to too low of a resistance.
AVAILABLE RESISTANCES:
As atomiser coils are a consumable item they do not carry a warranty.
]]>All Vaporesso GTX coils are made from the highest Nichrome element mesh wrapped with pure spun flax and organic cotton wicking blend providing you with brilliant performance and flavour.
Features:
These coils are compatible with the following Vaporesso goods:
Take note of your device’s compatible resistance range before purchasing. AVS does not take responsibility for coils that do not fire in your device due to too low of a resistance.
**Find the New and Updated GTX 2 Coils here
AVAILABLE RESISTANCES:
As atomiser coils are a consumable item they do not carry a warranty.
]]>So what makes the Freemax M Pro 2 Subohm Tank one of the Best new Prebuilt Coils Tanks out there? It’s all in the coil tech!! The Freemax M Pro 2 Replacement Coils feature the all new 904L Mesh Coils that heat eJuice rapidly and evenly thanks to the mesh coil heating element. The 904L Mesh Coils feature FM COILTECH4.0, which is the latest generation in mesh coil technology.
Military grade SS904L mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton ) provide you with and unrivaled vaping experience in a subohm tank.
The end result is a exceptional coil that produces some of the boldest and biggest vapour clouds on the market with superior flavour to set your vaper dial to smile all day long.
**These coils are made for the Freemax M Pro 2 Subohm Tank, also found on the Maxus 200 Kit, and are also compatible with the original Mesh Pro a.k.a. M Pro Tank.
They are NOT compatible with the Fireluke Mesh or Fireluke tanks.
Specs:
What’s in the box:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
These are the replacement pods for the Drag S and X Pod Mod Kits, and are reported to be compatible with the V.Suit Pod Mod Kit also.
If you’re needing the 510 base, and therefore an entire tank which can screw into your device you can buy the PnP Pod Tank instead over here.
Compatibilty:
Features and Specs:
PACKET INCLUDES:
2 x 4.5ml Pods
]]>This pod is setup for MTL (Mouth-To-Lung) vaping, has a 2ml e-liquid capacity and uses the VOOPOO PNP Replacement Coils. This pod has a thinner drip tip which cannot be removed and is bottom filling through the rubber plug.
Compatibilty:
Features and Specs:
PACKET INCLUDES:
2 x 2ml Mtl Pods
]]>help you to achieve the awesome performance of your favorite VooPoo system. VooPoo’s premium PnP replacement coils deliver a bottom vertical structure to ensure maximum flavour coupled with ample wicking ports to ensure consistency during extended use. Available in a stunning array of resistances, heating element, and wicking material combinations, this line of replacement coils work with with a huge variety of VooPoo’s modern systems — you’re certain to find the one that’s a perfect match for your chosen device and preferred style of vaping.
Comes in a pack of 5 coils.
Compatibility:
Please do note, higher wattage coils are not ideal in the Drag Baby Trio due to its lower wattage output than the Vinci. We recommend the R2, C1 and R1 for the Trio.
The Argus Air is compatible only with coils of 0.6 ohm and above. Do not purchase these coils for the Argus Air: M1, VM1, VM3, VM5 and VM6.
The V.Suit is compatible with coils of 0.3ohm or above. Do not purchase theses coils for the V.Suit: VM5 or VM6
AVAILABLE RESISTANCES:
PACKET INCLUDES:
Pack of 5
USAGE WARNING!
1- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
2- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Due to the nature of this product there is no warranty.
]]>AVAILABLE RESISTANCES:
These coils are compatible with the following tanks:
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Features and Specs:
AVAILABLE RESISTANCES:
Mesh X1
– Kanthal Single Mesh Coil,
– Egyptian Cotton
– 0.2ohm
– Recommended: 60 – 110W, best at 75 – 95W
Mesh X2
– Kanthal Single Mesh Coil,
– Egyptian Cotton
– 0.4ohm
– Recommended: 50 – 80W, best at 60 – 70W
These coils are compatible with the following tanks:
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
These sets of premium handmade alien coils are perfect for anyone trying to get the most from their favoruite Vaperz Cloud atomizer! These coil sets are proudly made domestically by Scott from Vaperz Cloud in the United Kingdom! Each coil set comes with 2 individual coil.
The Asgard Coil Set has been specifically designed to work optimally with the 30mm Asgard RDA. Each Coil Set comes with 2 individual coils that have a total resistance of 0.34 ohms. Vaperz Cloud recommend a leg length of 5.5mm for optimal positioning in the Asgard RDA.
The Valhalla Coil Set has been specifically designed to work optimally with the 40mm Valhalla v2 RDA. Each Coil Set comes with 2 individual coils that have a total resistance of 0.3 ohms. Vaperz Cloud recommend a leg length of 6.5mm for optimal positioning in the Valhalla v2 RDA.
The Valhalla Mini Coil Set has been specifically designed to work optimally with the 30mm Valhalla v2 Mini RDA. Each Coil Set comes with 2 individual coils that have a total resistance of 0.10hms. Vaperz Cloud recommend a leg length of 5mm for optimal positioning in the Valhalla v2 Mini RDA.
The Valkyrie Coil Set has been specifically designed to work optimally with the 30mm Valkyrie RTA. Each Coil Set comes with 2 individual coils that have a total resistance of 0.12ohms. Vaperz Cloud recommend a leg length of 5mm for optimal positioning in the Valkyrie RTA
Packet Contains:
2 x Vaperz Cloud Premium Coils
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
]]>The GeekVape Super Mesh Coils are the newest coils for a selective range of tanks in Geek Vape’s incredible line-up, such as the Cerberus Tank, Aero Mesh, & Shield Tanks. The integrated mesh heating element of these coils have a large heating surface area that supports effective burning of the e-liquids creating dense full clouds that will satisfy those attempting max flavour or cloud production. Geek Vape Super Mesh Coils are the most sought after in the market due to their incredible longevity as compared to the ordinary coils.
NOTE: Geekvape has recently updated their recommended wattage for the SuperMesh coils. They’re exactly the same as before with simpler info.
Features and Specs:
AVAILABLE RESISTANCES:
Mesh X1
– Kanthal Single Mesh Coil
– 0.2ohm
– Recommended: 60 – 70W
Mesh X2 New
– Kanthal Single Mesh Coil
– 0.4ohm
– Recommended: 50 – 60W
These coils are compatible with the following tanks:
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
FEATURES & SPECS:
0.16ohm Plex3D Coil:
– Manufacturer’s Recommended Wattage: 50 – 80W
0.35ohm Plex3D Coil:
– Manufacturer’s Recommended Wattage: 30 – 55W
PACKAGE INCLUDES:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Available Resistances:
• 0.28ohm: 100 – 200W, Single Parallel Coil
• 0.5ohm: 70 – 110W, Triple Vertical Coil
Packet Includes:
• 3 x Innokin Coils
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
]]>
for the The Valyrian 2 Mesh Sub-Ohm Tank uses Uwell’s UN2 mesh coil technology which has a larger heating surface and heats evenly for maximum efficiency. This coil structure uses highly innovative performance tech, and is designed for optimal e-liquid flow and allows faster ramp-up speed.
Features and Specs:
AVAILABLE RESISTANCES:
UN2 single Mesh Coil:
UN2-2 Dual Mesh Coil:
UN2-3 Triple Mesh Coil:
Quadruple Coils:
Packet Includes:
Please note: these are only compatible with the Valyrian 2 Tank.
The original Uwell Valyrian Coils are found here.
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Dry hits are a thing of the past, with the Caliburn Pods, you will be able to enjoy a clean and smooth vaping experience. Each pod also has a transparent window on its side allowing for quick checking of liquid level. Each Caliburn Pod is made with high-quality food grade plastic. Therefore, Uwell has ensured a premium vaping experience where no harmful materials will contaminate your vape juice.
Features and Specs:
**These pods are designed and will only work in conjunction with the Uwell Caliburn or Koko pod vape kits.
**If you properly prime your coils before use the manufacturer states that you can expect to see up to 7-16 days of usage out of one pod. Remember to let your pods prime for 3-5 minutes after filling with e-juice.
USAGE WARNING!
You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
Due to the nature of this product, there is no warranty.
]]>**These amazing coils are Now available in a Mesh Option.
Available Resistances:
SS316L 0.15ohm
– 95 – 120W
– Spiral pin: 95W to 105W
– Wave pin: 100W to 120W
UN2 Mesh 0.18 Ohm
– 90 – 100W
Please note: these are NOT compatible with the Valyrian 2 Tank
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
This coil sits horizontally, spanning across the entire circumference of the tank for maximum wicking surface area. Underneath the wiring is 100% Organic Cotton that provides ultra-fast wicking with all of your favourite e-liquids. With a resistance of 0.2 ohms, these coils are rated for use between 50 and 100W and provide the most optimal balance between flavour and cloud production between 70-80W. These coils feature a PEEK insulator to help dissipate heat during those hotter vapes, and are surprisingly easy to change.
If you own the Vandy Vape Maze Sub-Ohm BF RDA and are looking for a new replacement coil, or are interested in checking out the latest advancements in flavour for sub-ohm technology—scoop up some of our Vandy Vape Maze Replacement Coils and experience the benefits of Radial Disc coil vaping.
Features and Specs:
Pack Includes:
USAGE WARNING:
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. The organic cotton around the coil must be fully saturated before vaping.
3- This product is for experienced users and requires technical knowledge in order to properly use it.
Due to the nature of this product there is no warranty.
iJoy IMC Interchangeable Build Deck Features:
iJoy COMBO Replacement Coils Features:
Compatibility:
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
Australian Vaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
]]>
As opposed to virtually all other atomizer coils, which must be replaced entirely once the coil has burned out, these spectacular atomizers are configured in a way whereby the casing is reusable, while the cores are disposable. This system is not only extremely cost-efficient, but is also economically-efficient as well.
Vaporesso designed the EUC Clapton Atomizer Coils with 100% pure Japanese organic cotton. Unlike standard cotton, which is riddled with impurities such as bleach, pesticides, and colorants, organic cotton is wholly devoid of such impurities. The result is vapour production that is noticeably cleaner, purer, and truer than standard cotton.
**These coils don’t include the metal sleeve.
These coils are compatible with the:
Available Resistances:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>These coils are compatible with the SKRR, SKRR-S Tank and Luxe Kit from Vaporesso.
Whilst you can use NRG coils in the SKRR tank, the SKRR coils are NOT compatible in an NRG tank.
AVAILABLE RESISTANCES:
QF Strips 0.15ohm:
QF Meshed 0.2ohm:
3 x QF Coils.
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
]]>You can also use these coils as a direct replacement for any of the SMOK V8 Baby coil range as well as the Geekvape IM & Supermesh Coils found here.
These Coils are Compatible With The Following Tanks:
AVAILABLE RESISTANCES:
GT 2 Core 0.4 Ohm
– Clapton Style – Dual Coil
– 40 to 80W
– 55 to 65W Recommended Range
GT 4 Core 0.15 Ohm
– Clapton Style – Quad Coil
– 30 to 70W
– 45 to 80W Recommended Range
GT 6 Core 0.2 Ohm
– Clapton Style – Sextuple Coil
– 40 to 100W
– 70 to 90W Recommended Range
GT 8 Core 0.15 Ohm
– Clapton Style – Octuple Coil
– 50 to 110W
– 60 to 80W Recommended Range
GT CCELL 0.5 Ohm
– Clapton Style – Dual Coil
– Ceramic Wicking Material
– Recomended Wattage: 15 to 40W
GT CCELL 2 0.3 Ohm
– Clapton Style – Dual Coil
– Ceramic Wicking Material
– Recommended Wattage: 35 to 40W
GT4 Meshed 0.15 Ohm
– Mesh Coil – Dual Mesh Core
– 50 to 75W
– 60 to 70 W Recommended Range
– Rapid Heat Up Time, Intense Flavour and Vapour Production
GT Mesh 0.18 Ohm
– Mesh Coil
– Recommended Wattage 50 to 85W
As atomiser coils are a consumable item they do not carry a warranty.
]]>The SMOK TFV8 Baby V2 Replacement Coils are crafted with dense flavours and massive cloud production in-mind, utilizing a dynamic line-up of mesh cores introduced with the TFV8 Baby V2 Sub-Ohm Tank. The TFV2 Baby V2 Coils are optimized for mid-wattage to high-wattage configurations, offering a spectrum of mesh designs and multitude of holes to accommodate a range of vaping experiences.
AVAILABLE RESISTANCES:
Baby V2 A1
Baby V2 A2
Baby V2 A3
These coils are compatible with the following:
**They are NOT compatible with any other Baby series tank by Smok.
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- This product is for experienced users and requires technical knowledge in order to properly use it.
4- Due to the nature of this product there is no warranty.
Comes in a pack of 5 coils.
Compatibilty:
AVAILABLE RESISTANCES:
U2 – 0.4ohm: 40 – 80W, best at 55 – 65W
U4 – 0.23ohm: 50 – 120W, best at 60 – 80W
U6 – 0.15ohm: 65W – 110W, Best at 80 – 90W
U8 – 0.15ohm: 70 – 130W, best at 90 – 110W
P2 Mesh – 0.6ohm: 24 – 28W
N1 Mesh – 0.13ohm: 50 – 100W, best at 70 – 80W
N2 Mesh – 0.3ohm: 45 – 80W, best at 55 – 65W
N3 Triple Mesh – 0.2ohm: 65 – 100W, best at 75 – 85W
PACKET INCLUDES:
5 x Uforce Coils of your choosing
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Due to the nature of this product there is no warranty.
]]>AVAILABLE RESISTANCES:
TF-T3 – Triple Coil
TF-S6 – Sextuple Coil
TF-T8 – Octuple Coil
TF-N2 – Ni200 Nickel – “Air Coil”
PACKET INCLUDES:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
These coils are compatible with the following tanks:
AVAILABLE RESISTANCES:
V8-Q4 Quadruple Coil
V8-T6 Sextuple Coil
V8-T8 Octuple Coil
V8-T10 Deca/Decuple Coil
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- This product is for experienced users and requires technical knowledge in order to properly use it.
4- Due to the nature of this product there is no warranty.
]]>
These Coils Are Compatible With:
AVAILABLE RESISTANCES:
0.6ohm Coil
0.3ohm Coil
Packet Includes:
USAGE WARNING
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Due to the nature of this product there is no warranty.
]]>NEW – The Smok TFV12 Cloud Beast Mesh Coil Head is just the coil you need to ramp up your TFV12 Cloud Beast King vaping experience. This powerful coil head utilizes Kanthal heating material manufactured into a mesh design that helps to evenly distribute heat. Alongside this Kanthal material is the tried and true 100% Organic Fiber Cotton for optimal wicking with your favorite e-liquids. The superior Stainless Steel frame of the coil head traps heat inside to keep your tank cool and your coils hot. It also has twelve wicking ports to allow e-juice to continually flow into the coil head while you vape. SMOK has redone many of their coil heads with this mesh material because it has proven to last much longer than typical coils and it provides an unparalleled draw. The SMOK TFV12 Cloud Beast Mesh Coil Head is capable of outputting massive vapor clouds and enhanced flavor like it’s nobody’s business. If you’ve been letting your TFV12 Cloud Beast King Sub-Ohm Tank sit on the shelf then its time to shake off the dust and get back to it.
For building enthusiasts, SMOKTech introduces a dynamic V12-RBA-T with pre-installed clapton coils. It features a fresh-look in exotic builds, implementing a post-less deck with 6 terminal slots to create triple coil configurations to match the sophisticated power of the TFV12.
**Note: The TFV12 Replacement Coils are NOT compatible with the SMOK TFV12 Prince. Find those here.
**Replacement Cloud Beast King TFV12 Glass found here.
These coils are also compatible with:
AVAILABLE RESISTANCES:
V12-Q4 Quadruple Coil
V12-X4 Quadruple Coil
V12-T6 Sextuple Coil
V12-T8 Octuple Coil
V12-T12 Duodenary/Twelve Coil
V12-Mesh Coil
V12 RBA Rebuildable Head
V12 RBA-T Rebuildable Head
Packet Includes:
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
are unrivaled performance atomizer cores introduced with the amazing TFV12 Cloud Beast Prince Tank. Designed for mid-wattage configurations, it offers phenomenal flavour recreation and excellent vapour production. The TFV12 Prince introduces a variety of exotic configurations, such as V12 Prince Max Mesh, V12 Prince Dual Mesh, V12 Prince Triple Mesh, and Prince X2 Clapton.
These coils are only compatible with the TFV12 Prince Tank.
They are NOT compatible with the TFV12 Baby Prince or the original TFV12.
Coil packs comes in a pack of three replacement coils.
AVAILABLE RESISTANCES:
V12 Prince M4 Quadruple Coils
V12 Prince Q4 Quadruple Coils
V12 Prince X6 Sextuple Coils
V12 Prince T-10 Decuple Coils
V12 Prince Mesh Coils
V12 Prince Dual Mesh Coils – NEW
V12 Prince Triple Mesh Coils
V12 Prince Max Mesh Coils
V12 Prince Strip Coils
Packet Includes:
NOTE: These coils require priming before using. The organic cotton around the coil must be fully saturated before vaping. Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
]]>
Family is based off of the high performance V8 line, and retains much of the same performance profile despite the diminutive size. One of the most popular Sub-Ohm Tank systems to date, the SMOK Baby Beast proves its versatility with a wide selection of different coil options. With replacement coils ideal for flavour chasers, to coils preferred by cloud chasers; the Baby Beast platform can cater to almost all vapers. The two newest Baby Beast coils, the Strip and Mesh, offer the best of both worlds with great vapor production and maximum flavor output.
For building enthusiasts, Smok implements a robust V8 Baby RBA Head with two-post design to accommodate a plethora of build styles and coil structures.
These coils are compatible with the following tanks:
AVAILABLE RESISTANCES:
V8 Baby-M2 0.25 Dual Core
V8 Baby-M2 0.15 Dual Core
V8 Baby-Q2 0.6 Coil Head
V8 Baby-Q2 0.4 Dual Core
V8 Baby-X4 Quadruple Core
V8 Baby-T6 Sextuple Core
V8 Baby-T8 Octuple Core
V8 Baby Mesh
V8 Baby Mesh Q4
V8 Baby RBA Head
Packet Includes:
TFV8 Baby Beast Replacement Coils are NOT compatible with the TFV8 Cloud Beast Sub-Ohm Tank or the TFV8 Baby X or Baby Brother Tanks
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
]]>
Compatible with:
Features Specs:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>are designed for use with the T20S vape tank and EZ Watt Vape Kit only. Available in both 0.8 Ohm and 1.5 Ohm, this is a versatile coil that can be used for sub ohm vaping or mouth to lung vaping, depending on the option chosen. The higher-powered 0.8ohm coils are more than suitable for anyone looking for a warm, satisfying vape experience. Also, if you are vaping more VG-heavy (80%+) we would recommend the 0.8ohm coils.
If you prefer a lower, slower vape experience more akin to a cigarette, then give the 1.5ohm coils a go.
Despite a similar appearance, please note the Prism S Coils are not compatible with the iClear 30, iClear 30S, Endura T18 or Endura T22 tank models. Designed for ease of use, these Innokin vape coils feature ‘no spill coil swap’. Each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Available Resistances:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>Features & Specs:
Available Resistances:
Packet Includes:
NOTE: These coils require priming before using. The organic cotton around the coil must be fully saturated before vaping. Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
are designed for usage in the the Joyetech eGo ONE, eGo ONE Mini, eGo ONE XL and eGo ONE V2 Tanks. There are 2 different coils available.
The 1.0 ohm coils are especially suitable for a mouth inhale. It mimics the feeling of taking a puff of a cigarette. With its tighter draw, it is perfect for people wanting the sensation of a real cigarette. These coils are one of the most economical coils on the market.
The 0.5ohm is especially suitable for mouth to lung inhale or direct lung inhale. The sub ohm coil can easily create huge vapour production. With its loose draw, it is perfect for any cloud chasing enthusiast.
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>Available Resistances:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>Available Resistances:
0.25ohm
0.4ohm
UN2 Meshed-H 0.2ohm
SS316 Meshed-H 0.14ohm
USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>So what makes the Freemax Mesh Pro Subohm Tank one of the Best new Prebuilt Coils Tanks out there? It’s all in the coil tech!! The Freemax Mesh Pro Replacement Coils feature the new and innovative single, double and triple Mesh Coils. Each coil is designed with the all new mesh kanthal wire to increase the overall surface area resulting in a super fast ramp up time. The end result is a exceptional coil that produces some of the boldest and biggest vapour clouds on the market with superior flavour to set your vaper dial to smile all day long.
Available Resistances:
These Coils Are Also Compatible With:
FireLuke Tank
FireLuke Pro Tank
**Note: These coils are not compatible with the FireLuke Mesh Tank or the M Pro 2 Tank
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
( also known as the Zenith Replacement Coil) is designed for Zenith D22 3ml & 4ml MTL tank, now also compatible with the Zlide MTL tank. These coils are long lasting and deliver great flavour. You can choose one according to your needs. You can replace coils without emptying tank.
The Innokin Zenith Z Replacement Coils allow you to get the most vaping pleasure out of your Innokin Zenith MTL Tank and are also compatible with the Zlide Tanks. Each coil features large wicking ports which prevent your coils from burning out prematurely or delivering an unpleasant taste. The 1.6ohm MTL Coil can handle 10W to 14W and the .8ohm MTL Coil can handle 14W to 18W if you desire a warmer vape. The Zenith Plexus Z Replacement Coils are exceptionally durable and reliable thanks to high-quality materials such as stainless-steel and organic cotton. Mesh material increases the surface area, providing a more consistent vaping experience. These coils will last for an extremely long time thanks to the high standards for which Innokin is known.
Compatible With the Following:
Available Resistances:
Packet Includes:
USAGE WARNING!
1- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
2- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
These are the replacement coils for the Sub X tank that came with your Flowermate hybrid X Vaporiser.
Features and Specs:
Available Resistances:
Packet Includes:
**Please Note: these are the 0.5 coils, not 1.0 ohm as the picture displays.
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Available Resistances:
Features and Specs:
Packet Comes With:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Designed and engineered in the UK by Atom They feature vertical ceramic coils and are 24CT Gold plated.
0.5Ω coils:
These coils are compatible with following products:
Features & Specs:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
G Clapton OVC atomizers enable your devices to push more power and operate under higher wattage than standard coils so they can deliver competition-level clouds, enhanced flavor, reduced burning, and a longer lifespan. OVC coils will give you RDA vaping performance without the hassle of RDA’s.
According to Atom Vapes, these Clapton coils are designed to last three to four weeks – which is a lot longer than standard stock coils.
Resistance: 0.5 ohm (works with 25 to 50W)
These coils are compatible with following products:
Features & Specs:
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
These new design bottom vertical coils (BVC) are wicked with organic cotton for a superb flavour. Aspire has also taken this coil design a step farther with larger juice holes for improved juice flow. The Aspire Atlantis Replacement Coils will give you great flavour and an awesome vape experience.
Available Resistances:
The Atlantis V2 coils are compatible with both the Atlantis range and the Triton range, although if using on an Atlantis V1 we recommend sticking with the 0.5 ohm.
Please Note: 0.3 ohm V2 coil is not suitable for use with the Aspire Atlantis V1.
Packet Includes:
As atomiser coils are a consumable item they do not carry a warranty.
]]>
Moreover, with the Nautilus X Coil’s oversized juice holes, it can accommodate e-juices with a VG consistency as high as 80% without clogging.
These coils are compatible with the Nautilus X tank only. Not the Nautilus or Mini Nautilus tanks.
These coils are compatible with the Nautilus X tank only. Not the Nautilus or Mini Nautilus tanks.
Available Resistance:
These are revolutionary coils with a unique “Bottom Vertical Coil” (BVC) design. They are wicked with pure organic Japanese cotton. This ensures better wicking and more airflow which in turn translates into a pure and clean vape with amazing full bodied flavour.
Now available in Mesh!
Available Resistances:
Compatibilty:
SPECS & FEATURES:
PACK COMES WITH:
As atomiser coils are a consumable item they do not carry a warranty.
]]>for your Triton 2 Tank uses the well-designed “Bottom Vertical Coil” (BVC) technology are wicked with pure organic japanese cotton. This ensures a pure taste, a clean safe vape and amazing full bodied flavour.
Compatability:
These coils are also compatible with
Available Resistances:
0.3 0hm & 0.4 Ohm Surgical Steel:
0.5 ohm Clapton Coil:
1.8 ohm Kanthal Coils:
Triton Ni200 Nickel Coil:
SPECS & FEATURES:
PACKET CONTAINS: