The highly anticipated successor to the legendary VooPoo Drag is now available, with a ton of awesome features and upgrades, in the visually captivating VooPoo Drag 2.
The VOOPOO Drag 2 177 Watt Starter Kit consists of the new Voopoo Drag 2 Mod and the UFORCE T2 vape tank. Powered by dual 18650 batteries (sold seperatley), the Drag 2 can fire up to a powerful 177W. As a new generation of Drag, the Drag 2 is lighter, more comfortable to hold, and easier to use. The Voopoo Drag 2 Mod adopts the upgraded GENE.FIT chip, which is secured by a V0 class fireproofing bridge to assist in blocking dust, liquid or burnout.
The Drag 2 now features FIT Mode. FIT mode allows the device to auto detect optimal power output for the installed sub-ohm tank and allows the user to select from three preset FIT profiles 1, 2 and 3 which are battery saver mode, flavour mode, and cloud mode respectively. Fit 1 is Battery Setting, allowing the user to conserve battery at the lowest recommended output for the installed coil head. Fit 2 is Flavour Setting, which gives medium output with an emphasis on flavour production. Fit 3 is Cloud Setting which provides maximum power for maximum cloud production. The new chip has an increased 5 to 177W power output, 0.05 to 5.0 ohm resistance, 0 to 7.5V output, and 40A max current output. It also has a 5 bank memory for user defined settings as well as a temperature control suite that has an atomizer resistance of 0.05 to 1.5 ohm, temperature range of 200 to 600 Degrees Fahrenheit and is compatible with nickel, titanium, and stainless steel.
The VooPoo Drag 2 has been paired with the redesgined UForce 24.6mm Sub-Ohm Tank that has a 8ml bubble glass e-liquid capacity and 3.5ml capacity with the standard glass tank. This sub-ohm tank’s top fill port can be accessed through a slide-to-fill top cap. The UForce T2 Sub-Ohm Tank is compatible with the entire UForce replacement coil family and comes with the U2 and N2 replacement coils. The UForce U2 is a dual kanthal coil with an atomizer resistance of 0.4 ohm, recommended range of 40 to 80W, and is best at 55 to 65W. The new UForce N2 coils are dual kanthal mesh, have a resistance of 0.3 ohm, a recommended range of 45 to 80W, and is best at 55 to 65W. The UForce T2 has three fully adjustable 10mm by 3mm air slots. The UForce T2 has a stainless steel 510 threading, 24K gold plated contact and a 14mm wide 810 bore drip tip.
The VooPoo Drag 2 The device requires 2 x 18650 batteries to operate, found here.
Replacement Glass for the Voopoo T2 Tank, found here.
Coils for the T2 Tank found here.
Connector/Adapter piece for the Uforce Tank Replacement Glass found here.
We recommend an external charger for optimal charging, found here.
Due to the nature of manufacturing, design, and unique resin elements, each VOOPOO DRAG 2 Kit features a unique colorway and patterning. Photos are for reference only.
Features and Specs:
- Dimensions – 88.3mm by 51mm by 26.5mm
- Dual High-Amp 18650 Battery – Not Included
- Highly Advanced GENE FIT Chip
- Wattage Output Range: 5-177W
- Voltage Output Range: 0-7.5V
- Resistance Range – Power Mode: 0.05-3.0ohms
- Resistance Range – TC Mode: 0.05-1.0ohms
- Temperature Range: 200°-600°F/100°-315°C
- Supports Ni200, Titanium, Stainless Steel Compatibility
- TCR Adjustments Mode
- Battery Set
- Flavour Set
- Cloud Set
- Superior Zinc Alloy Chassis Construction
- Visually Striking Resin Inlay Design
- Intuitive OLED Screen
- Large Firing Button
- Mode-Setting Button
- Two Adjustment Buttons
- Magnetized Battery Door Cover
- Output Over-Current Protection
- Overcharge Protection
- Over Discharge Protection
- Short-Circuit Protection
- Over Temperature Protection
- Brand Reverse Protection
- Switch Timeout Protection – 10 Seconds
- MicroUSB Port
- 510 Connection
- Available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, Ink
VOOPOO UFORCE T2 Sub-Ohm Tank Features:
- 25mm Tank Diamenter
- 28mm At Widest Point
- 3.5mL Standard Juice Capacity
- 8mL Maximum Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement
- Quick Vent Channel Design – Rapid Heat Discharge
- Short Chimney – Flavour-Focused
- UFORCE OCC Coil Technology
- 0.4ohm U2 Dual Coil – rated for 40-80W
- 0.2ohm N3 Triple Mesh Coil – rated for 65-100W
- Convenient Sliding Top-Fill Method
- Precision Triple Auxiliary Bottom Airflow Control
- 14mm Resin Widebore Drip Tip – Vibrant Colorways
- 24K Gold-Plated 510 Connection
This Kit Comes With:
- 1 DRAG 2 177W Mod
- 1 UFORCE T2 Sub-Ohm Tank
- 1 0.4ohm U2 Dual Coil
- 1 0.2ohm N3 Triple Mesh Coil
- 1 Spare Glass Tube (3.5mL)
- 1 MicroUSB Cable
- 1 Spare Parts Bag
- 1 Instructional Manual
- 1 Warranty Card
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- Always use batteries in pairs – same brand, mAh, and amp limit
4- This is an advanced Item. Please use at your own risk and always use proper precautions and handling. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance.
5- We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
6- Please note that we do not recommend using the built-in USB charging feature on mods that use replaceable lithium ion cells. Lithium ion batteries must be balance charged using a good quality external battery charger to avoid damaging the cells and to reduce the risk of venting. Micro and mini USB ports are notoriously fragile and as such we do not offer a warranty on any USB charging ports if you choose to ignore this warning.
Please Note: The tank in this kit and coils are a classed as consumable items, as such they do not carry a warranty.