Asgard Mini 25mm RDA – Precious Metal Caps

Asgard Mini 25mm RDA – Precious Metal Cap

Currently the only offering from VC in Precious Metal is Polished Copper with a Stainless Steel Deck, as pictured.

A slightly smaller deal of a bigger deal thunders in, the lightning crashes: the Asgard Mini RDA from Vaperz Cloud has struck (again)!

The Asgard Mini is a top airflow, 25mm RDA with a 6mm juice well. It boasts a semi-postless design, with the terminals ending up top of the bottom of the RDA to ensure even the mightiest builds can be accommodated. The deck brings four 2.5mm x 3.0mm individual post holes for easy coil installation with a quick release squonk pin which makes swapping from drip to squonk mode extremely fast and easy.

It’s unique airflow design is a key aspect to the vape experience it offers compared to other atomizers on the market. On the outside, the RDA is sporting 48 airflow holes offering massive intake into the 2nd stage airflow chamber to build pressure before it is diffused onto the coil. The air travels on a 30 degree angle through the ULTEM airflow diffuser – pushing under the coil grabbing all the flavour your coils can create before it travels through the reduced chamber and up into the drip tip.

It’s properly, truly a new horizon for VC, and we’re super proud to bring such affirmative innovation to you, in a smaller form factor! Do not hang around for the third arc, as VC only make limited batches at a time!

The squonk pin on this RDA is pre-installed, so if you intend to use it as a dripper don’t forget to make it the regular solid 510 pin.

Note: The user of this atomizer must install wick (cotton) and wire (coil) in order to use it.
This atomizer is not pre-installed with coil.
Wick and wire are found here.

Features and Specs:

• Diameter: 25mm
• Materials: Stainless Steel + ULTEM
• Semi-postless build deck with four 2.5mm x 3mm terminals
• 6mm deep juice well
• Locking top cap and rail system
• Unique adjustable airflow with 48 holes
• ULTEM airflow diffuser and chamber reducer
• Two in one standard and squonk BF 510 pin with quick release
  • Insert grub screws in squonk pin for standard RDA setup
• 24k gold plated brass 510 positive pin and negative post

This Kit Comes With

• 1 x Vaperz Cloud Asgard Mini RDA
• 1 x Tallboy 810 Drip Tip
• 1 x Shorty 810 Drip Tip
• Spare Parts (Screws, O-rings)

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Australian Vaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.