Vandy Vape Pulse 24 BF RDA
The Vandy Vape Pulse 24 BF RDA presents the comprehensive upgrade of the Pulse BF platform made in collaboration with Tony B., expanding the chassis with a postless deck that can accommodate dual coil structures combined with the side-mounted Kennedy-style airflow design.
The construction of the Pulse 24 BF RDA measures 24.4mm in base diameter, retaining similar aesthetics as the original with a streamlined design element that creates a simple yet elegant appeal.
Made in conjunction with Tony B., the creator behind the Vapor Trail Channel, the innovative conceptualized airflow style returns, featuring a side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes for maximal vapor production, while simultaneously doubling as an anti-spill mechanism due to the slanted orientation.
The Pulse 24 BF integrates a quad terminal postless design, featuring large terminal openings set into the deck and tightened via side-secured Phillips screws. The spacious chamber accommodates a wide range of large coil structures with a focus in providing a capable Dual Coil structure with ample wicking well. The juice well is cleverly designed to allow efficient squonk-ready set-up, with an included bottom-feeding 510 pin that feeds directly into the two sides of the juice well. Offering an expandable Dual Coil version with ergonomic updates to create one of the most advanced rebuildable atomizer, the Pulse BF RDA by Vandy Vape & Tony B. is a worthy competitor to all the RDA’s in the market.
Note: The user of this atomizer must install wick (cotton) and wire (coil) in order to use it.
This atomizer is not pre-installed with coil.
Wick and wire are found here.
Features and Specs:
- A Tony B.’s Project
- 24mm Diameter
- 2mm Deep Juice Well
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Innovative Postless, Quad Terminal Design – Dual Coil Version
- PEEK-Insulated Positive Terminal Post
- Negative Terminal Post
- Dual Coil Configurations
- Side-Mounted Kennedy-Style Airflow
- Dual Slotted Side Airslots
- Quad Airflow Tubes Inside Chamber
- 16mm Wide Delrin Widebore Drip Tip
- 17.5mm Wide ULTEM Widebore Drip Tip
- 510 Drip Tip Adapter
- Innovative Squonk Pin Set-Up
- Gold-Plated 510 Contact Pin
- Available in Stainless Steel, Black, Gold, Blue, Red, Rainbow
This Kit Comes With
- 1x Vandy Vape Pulse 24 BF RDA
- 1x ULTEM 810 Drip Tip
- 1x Delrin 810 Drip Tip
- 1x T-Tool
- 1x 510 Drip Tip Adapter
- 1x Build Rod
- Spare Part Pack
- User Manual
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.