Vandy Vape Bonza RDA Tank
The Bonza RDA is a collaborative effort by Vandy Vape and Australia’s own The Vaping Bogan. It features a two-post design with a fixed screw post build deck as well as a unique spring-loaded clamp mechanism that is both easy and simple to build on.
Measuring 24mm in diameter, with a 7mm juice well, The Bonza RDA is designed for both single and dual coil configurations. Inside, the build deck implements a specialised two-post, dual terminal per post design in which the outer two terminals are top-secured via flathead slotted screws. A unique mechanism lies within the inner two terminals are clamp-secured with spring-loaded design for a truly intuitive way to build complex coil configurations. The Bonza RDA features a side airflow system with 15 mini airholes on two sides on the top cap which may be adjusted using the top adjustable airflow ring. Airflow enters the structure through a series of parallelogram airslots funneling vapor into the chamber to create a cloud-chasing experience.
The Bonza RDA uses the 810 Drip Tip for high-performance atomizers, including a trio of drip tips with various sizes and materials such as Resin, ULTEM, and Delrin. Also included in each kit is a squonk-ready 510 pin and a 510 drip tip adapter for added versatility. No two resin products will ever have the same design and look due to the unique manufacturing process. ULTEM is a high temperature plastic with a significantly higher melting point compared to Delrin. ULTEM is also a very hard material, making it a suitable choice when threading into stainless steel.
Note: The user of this atomizer must install wick (cotton) and wire (coil) in order to use it. This atomizer is not pre-installed with wire coil.
Wick and wire are found here.
Features and Specs:
- Collaboration between Vandy Vape & The Vaping Bogan
- 24mm Diameter
- 7mm Deep Juice Well
- Superior 303 Stainless Steel Construction
- 24K Gold-Plated Build Deck
- Unique Two-Post Design – Fixed Screw Clamp Post Design
- Outer Terminals – Top-Secured via Slotted Flathead Screws
- Inner Terminals – Top-Secured via Clamp Mechanism
- Parallelogram Airslots on Each Side
- Top Adjustable Airflow Ring
- Top Cap with Side Airflow System
- 15 Mini Airhole Dual Airflow Design
- Direct-to-Coil Chamber Effect
- 18mm Wide 810 Resin Widebore Drip Tip
- 17.5mm Wide 810 ULTEM Widebore Drip Tip
- 16mm Wide Delrin Widebore Drip Tip
- Gold-Plated 510 Connection
- Easy to Build Design
- Designed for Single and Dual Coil Configurations
- Includes 510 Drip Tip Adapter
- Includes Squonk-Ready 510 Pin
This Kit Comes With:
- 1 x Bonza RDA
- 1 x 810 Resin Widebore Drip Tip
- 1 x 810 ULTEM Widebore Drip Tip
- 1 x 810 Delrin Widebore Drip Tip
- 1 x 510 Drip Tip Adapter
- 1 x Squonk-Ready 510 Pin
- 1 x Accessory Bag
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.