Vandy Vape Pulse BF Squonk Kit
- Utilises a 18650 or 20700 Battery
- 8ml Capacity
- Pulse 24mm BF RDA
The Vandy Vape Pulse BF Squonk Kit
is the second iteration of the Vandy Vape Pulse BF mod. It comes paired with the Pulse BF RDA from Tony B. of the Vapor Trail Channel and Vandy Vape. These two top-selling products are now available together in one purchase for your vaping convenience.
The Pulse BF Squonk Box Mod was designed to be both affordable and accessible to people wanting to enter the world of bottom-feeding atomizers. The straightforward, solid-coloured frame features only a single firing button, a subtle ‘Pulse’ logo, and a curved design for a comfortable grip.
The new coloured panels are fully interchangeable and will also be available separately. These new coloured panels will also swap out on your original BF Mod for those of you who already own one.
The Pulse BF mod features an intelligent fire button with a locking power safety switch that easily cuts power from the switch when not in use. This mod also features full copper contacts, and is wire free providing a direct connection from the switch to the spring loaded 510 connector for optimal conductivity. The Pulse BF mod uses a food grade silicone bottle that is easy to squeeze and easy to change, which you will want to do with the nine different colors available! This mod can use either an 18650 or 20700 battery and has two access points for easy removal of your battery.
Attached to this mod is the outstanding Vandy Vape Pulse RDA. The superior Stainless Steel chassis consists of dual adjustable airflow holes on each side that measure 3mm in diameter. These airflow holes are slanted downward for a unique, leak-resistant design that brings air directly to the coils in a jet funnel fashion. The extra large Gold-plated post-less build deck allows for both single and dual coil configurations that are held in place via four recessed side-mounted Philips head screws. The build deck features two 7mm deep juice wells capable of storing 2mL of e-liquid at a time, leaving a potential 10mL capacity throughout the entire setup. If you want to use this RDA with a different mod, Vandy Vape has included a gold-plated 510 contact pin so you can do just that. Pre-installed with this tank is a 17.5mm wide-bore Ultem drip tip—but if that’s not your style, Vandy Vape has included a 16mm 810 wide-bore Delrin drip tip as well as a 510 drip tip adapter.
Features and Specs:
- Dimensions: 27 x 50 x 100mm (D x W x H)
- Construction: Nylon / ABS (Acrylonitrile Butadiene Styrene) and Stainless Steel
- Heat Resistant
- Food Grade Silicone Squonk Bottle
- Capacity: 8ml
- Battery: 1 x 18650 or 20700 (Not Included)
- Interchangeable Dual Magnetic Panels
- Unregulated Device
- Intelligent Fire Button
- Power Safety Lock Switch
- Direct Copper Contacts (No Wires)
- Peek Insulator
- Spring Loaded 510 Contact
- Dual Terminal Post-less Style Build Deck
- Gold Plated Deck and Screws
- 2ml Juice Well
- 2 Drip Tip Variations
- Direct Airflow Onco the Coil System
- Slanted Jet Funnel Adjustable Top Side Airflow Control
- 2 Airflow Jets on Each Side
- 24K Gold Plated 510 Connection
- Colors: Ultem / Red / Green / Blue / Pink / White
This Kit Comes With:
- 1 x Pulse BF BOX MOD
- 1 x 18650 Battery Adaptor
- 1 x Pulse 24 BF RDA Special Edition
- 1 x 16mm Delrin Drip Tip
- 1 x Accessory Bag
ATTENTION: For ADVANCED USERS ONLY, with a knowledge of Ohm’s Law and Battery safety, only use quality hi-amp batteries. Mechanical Mods and Rebuildable Atomizers are for advanced users only. Mechanical Mods and Rebuildable Atomizers are advanced user products. Use at your own risk.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Vaporesso Revenger X 220W Starter Kit W/ NRG 5mlTank