Same Day Dispatch on Orders Placed by 11:30am

AVS will be taking a Christmas break from December 24th through to January 10th.
AVS wishes you and your families a safe and Merry Christmas and would like to thank our wonderful customers for their continued support.

Search
Generic filters
Exact matches only

Cart

Steam Crave Hadron Plus DNA 250C Box Mod Kit

$349.99

Steamcrave

  • DNA 250C chipset by Evolv
  • 200W Mod
  • 8/16ml Capacity
  • Dual 18650/20700 or 21700 Battery
  • Single or Dual Coil Configuration
Clear

or 6 weekly interest-free payments from $58.33 with Laybuy what's this?

Add to Wishlist
Add to Wishlist

Steam Crave Hadron Plus DNA 250C Box Mod Kit W/V2 RDTA Atomizer

Steam Crave Hadron Plus DNA250C Kit is a combination of the Hadron Plus DNA250C Mod and the Steam Crave PLUS V2 8ml RDTA.

The Hadron Plus utilizes the Evolv’s DNA 250C chip featuring an output wattage of 200W with an industry leading power efficiency rating. The chip contains three efficient vaping modes: Replay Mode, Watts Boost Mode and Accurate Temperature Control.

  • Replay Mode will capture the flavour and satisfaction of your perfect Puff. It will provide this same level of performance and consistency for all subsequent puffs.
  • Watts Boost will briefly increase the power delivery at the start of firing to reach your vapour output faster.
  • Accurate Temperature Control will prevent the coil from becoming too hot and provide a stable performance.

The Hadron Plus DNA is a dual 21700 battery (not included) device, capable of 200W and features ultra-fast adjustable wattage. With it’s durable and tough metallic material, you don’t need to worry about deep dents and scratches, furthermore the shape of the device allows for an ergonomic feel in the hand.

The Steam Crave Aromamizer PLUS V2 RDTA is touted as the most versatile RDTA. It features an expandable juice capacity, a postless build deck with four deck terminals, and a flippable airflow control ring. Constructed from durable stainless steel, the Aromamizer Plus V2 RDTA can hold a whopping 8ml of eJuice (standard form) and can be further expanded to hold up to 16ml. The Aromamizer Plus V2 adopts the smoother airflow from restrictive DL to airy DL and better airflow adjustment in lower wattage 30+W.

The Plus V2 can lock in a dual coil configuration using side secured hex screws and features a juice flow control ring (ACF) allowing careful metering of juice to the build deck. The flip over AFC ring allows for more airflow options for mesh decks and single coil decks. Refills are executed via the threaded top fill system, revealing a pair of large fill ports to accommodate chubby unicorn or needle nose bottles. The Aromamizer Plus V2 RDTA, truly is a versatile RDTA, providing you with an outstanding experience and fun in various capacity and decks.

The HADRON PLUS combo is undoubtedly the best match for the fabulous flavour and a steady performance.

This Kit requires 2 x 18650 batteries  (sold separately), found here.
We recommend an external charger for optimal charging, found here.
The Aromamizer Plus V2 RDTA requires wick and wire. Find them here.

Steamcrave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C KitSteam Crave Hadron Plus DNA 250C Kit

Features and Specs
Steam Crave Hadron Plus DNA250C Mod:

  • DNA 250C chipset by Evolv
  • Size: 58* 34* 98mm
  • Boost mode and replay function
  • Material: Aluminium Alloy
  • Battery: dual 21700/ 20700/ 18650 battery(Not Included)
  • Input Voltage: 6.0V- 8.4V
  • Battery Voltage: 3V-4.2V
  • Output Voltage: 0.2V-8.0V
  • Power: 5-200W
  • Current Range: 0.5A-30A
  • Max Charging Current: 3A (2A suggested)
  • Temperature Range: 200℉-600℉
  • Screen Pixel: 0.9” (80*160 pixel) full Color TFT Display
  • Firmware upgrade
  • Built-in onboard charging
  • Fast Charging
  • Pass-through
  • On-the-go Use
  • Atomizer protection
  • Low resistance protection
  • Onboard reverse polarity protection
  • Short circuit protection
  • Overheat protection
  • Low Voltage step down protection

Steam Crave Plus V2 RDTA

  • Diameter: 30mm
  • Both An RTA And As An RDTA
  • Material: Stainless Steel & Glass
  • Capacity: 8.0ml/16ml
  • Drip Tip: 810 drip tip
  • Resistance Supported: 0.1ohm-3.0ohm
  • Coil Material supported: Nickel, Titanium, SS460, SS316, KA1, Nig0, Ni90
  • Side Adjustable Airflow System
  • Single Coil Postless Deck

This Kit Includes:

  • 1* Hadron Plus DNA 250C Box Mod (Evolv Logo on) without battery
  • 1* USB Connecting Cable
  • 1* User Manual
  • 2* Battery Wrap
  • 2* 18650 Sleeve
  • 1* Aromamizer Plus RDTA equipped with Plus V2 Postless Deck
  • 1* Spare 8ml Glass
  • 1* 8ml Metal Extension
  • 2* 6mm Chimney Reducer for Glass Tank Section and Metal Tank Section
  • 1* Spare Part Bag of O-rings and Grub Srews, Slotted Screws
  • 1* Allen Key
  • 2* Coil Cotton
  • 1* Manual
  • 1* Mesh Deck Kit
  • 1* Vape Band
  • 1* SteamCrave Sticker

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

 

Express Post is being prioritised by Australia Post, however due to the current demand for postal services, next day is not being guaranteed. 

Please note the estimated time for regular post is 3 – 10 business days.
Customers in WA and Victoria, we are finding your parcel can take up to 2-3 full weeks.  If you’re in hurry for your goods we suggest express post.

Read Before Using Product

 
You must read, understand, and agree to the following before purchasing.
 
Mechanical mods are an advanced piece of hardware not suitable for beginners. Mech mods are dangerous due to their lack of protection.
 
Mechanical devices can be extremely dangerous if used and handled incorrectly.  They are NOT regulated, and therefore include no short circuit protection or other protections found in regulated devices for the battery. Please be sure that you’ve done your research and know the dangers of not having any circuit protection.
 
Extensive knowledge of battery safety, ohms law, and how to correctly care for you mod are an absolute must in order to safely use an unregulated mod.
 
In purchasing this device you are agreeing that you understand:
    • the importance of unregulated mod safety
    • how to apply unregulated mod safety to yourself and the device.
    • how to care for your mechanical mod.
    • how to care for your batteries.
    • the importance of ohms law.
    • how to use ohms law.
    • the importance of battery safety.
    • how to apply battery safety.
    • Australian Vaping Supplies and its Staff will not be held responsible for any injuries or losses that may occur through use or misuse of a mechanical mod.
 
GENERAL USE WARNINGS:
 
  1. This product is not intended for non-smokers. Don’t use if you currently don’t smoke tobacco or vape.
  2. Do not allow others to use your device at any time.
  3. Keep all directions for future use and use only as instructed.
  4. This product is not a smoking cessation device nor is it intended to be one.  If you are trying to quit smoking or vaping please consult your doctor.
  5. You must be of legal smoking age in your jurisdiction to use this product.
  6. Do not drink the e-liquid.
  7. Vape outdoors and away from the vicinity of humans and pets.
  8. Do not modify or attempt to disassemble this product.
  9. Do not attempt to fix, correct, replace or install any part of the vaping apparatus.
  10. If you hear anything unusual from the device immediately stop using it and seek further advice.
  11. Dispose of according to local laws.
  12. Vape away from the vicinity of people and pets.  The effects of second hand vapour have not been scientifically confirmed.
  13. Do not use while driving
  14. KEEP AWAY FROM CHILDREN AND PETS.
  15. Do not use if you have existing health problems.

Thank you. Enjoy your Discount.

Use the Coupon Code:

Welcome10

At Checkout for $10 Off