The Smok TFV12 Baby Prince Tank..
..is the upgraded version of the SMOK TFV8 Baby Beast Tank taking design from the SMOK TFV12 Prince. The TFV12 Baby Prince Tank utilizes new and improved TFV8 Baby Beast coils for an enhanced flavor and vapor production using the same or similar wattage. The TFV12 Baby Prince Tank utilizes a 4.5ml bulb glass tube for a larger eJuice capacity. It also features a new rotary top fill design with a locking mechanism that is easily unlocked with a press of a button for quick and simple access. The TFV12 Baby Prince Tank features two new Baby Beast coils including the SMOK V8 Baby-T12 Red Light Duodecuple Coil which light ups when fired and the SMOK V8 Baby Mesh Coil 0.15ohm atomizer head which has a fast heat up time and increased vapor production. The SMOK TFV12 Baby Prince is topped off with a majestic wide bore Cobra resin drip tip that is sure to stand out.
**Note: The SMOK TFV12 Baby Prince Tank is NOT compatible with the original TFV12 or TFV12 Prince replacement coils. Also, due to the unique manufacturing process each drip tip will appear slightly different.
Check out the Smok Baby Prince Coils for this tank here.
Check out the Replacement Glass for the Baby Prince Tank here.
Features and Specs:
- 53.7mm x 26mm
- 23mm / 26mm Diameter
- 510 Threaded
- 3.0ml / 4.5ml eJuice Capacity
- Crown-Style Design
- Top Rotary Fill Design with Locking Mechanism
- Large Central Airflow Chamber
- Stainless Steel Construction
- Wide Bore Cobra Resin Drip Tip
- Dual Adjustable Wide Airflow Slots
- New TFV8 Baby Beast Coils for Flavour and Vapour
This Kit Comes With:
- SMOK TFV12 Baby Prince Tank
- V8 Baby-Q4 Quadruple Coil 0.4ohm
- V8 Baby-T12 Red Light Duodecuple Coil 0.15ohm
- V8 Baby Mesh Coil 0.15ohm
- Replacement Glass Tube
- Spare Parts
- User Manual






USAGE WARNING!
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil. This means the cotton around the coil must be fully saturated before vaping.
3- Place a few drops of e-liquid directly into the cotton wicks around the coil. Fill the tank and stand it upright for at least 10 minutes (longer in cooler temperatures). A quicker way to prime it is to draw through the tank without firing, a few times.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
Australian Vaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.