The SMOK ProColor 225W TC and TFV8 BIG Baby Beast Full Kit is a new device which follows up the hottest set of the year – the Alien 220W TC Kit with the Baby Beast. Note this one comes with the BIG BABY TANK.
The SMOKTech ProColor Kit is a showstopper with it’s sleek shield design and Please Note: The tank in this kit and coils are a classed as consumable items, as such they do not carry a warranty.. This powerful mod can fire up to 225 watts and supports temperature control modes for nickel, titanium and stainless steel wire. The ProColor features a large and vibrant 1.3″ color OLED shield display screen with a redesigned and updated operating interface. There are six different colour LED lights for the display screen and twelve different colour LED lights for the backlight.
Choose from a normal, gradient, jump, flash or fade LED light transition that is sure to be a crowd pleaser. The ProColor features a hidden anti-slip fire button located on the side of the device. This mod requires (2) high amp 18650 batteries (sold separately) and may be charged via the micro USB charging port.
This device requires 2 x 18650 batteries (sold separately) to operate. Find them here.
Find coils for the Big Baby Beast Tank here.
Replacement Glass for the TFV8 Big Baby Beast Tank, found here.
We recommend an external charger for optimal charging, found here.
- Dimensions: 85*46*29.5mm
- Wattage Range: 6W – 225W
- Temperature Range: 200°F – 600°F / 100°C – 315°C
- Resistance Range:
– 0.1Ω – 3.0Ω (VW Mode)
– 0.06Ω – 3.0Ω (TC Modes)
- Output Voltage: 0.5V – 9.0V
- Modes: VW, TC(Ti, Ni, SS), Memory
- RGB Backlights
- Six Different Colour LED Lights for Display Screen
- Twelve Different Color LED Lights for Backlight
- Choose from Normal, Gradient, Jump, Flash and Fade LED Light Transitions
- Large 1.3 Inch High Definition Colour Display
- Redesigned and Updated Operating Interface
- Shield Shaped Design
- Detailed Vaping Data
- Puff Monitoring System
- Carbon Fiber Back Panel Accent
- Ergonomic Lateral Fire Key
- Micro USB Port (Charging & Upgrading)
- Firmware Upgradable
- Requires (2) 18650 Battery (Batteries Sold Separately)
- Latched Bottom Battery Access Panel
- Intelligent Atomizer Recognition
- 12 Second Cut Off
- Short Circuit Protection
- Overheating Protection
- Low Battery Warning
Big Baby Beast Tank:
- Dimensions: 56*24.5mm
- 5.0mL Tank Capacity
- Stainless Steel Construction
- Glass Tank Section
- Dual Cyclops Adjustable Airflow
- Top Fill System
- Wide Bore Delrin Drip Tip
- Swivel Action Top Fill
This Kit Comes With
- 1 x Procolor Mod
- 1 x TFV8 Big Baby Tank
- 1 x V8 Baby Q2 Coil 0.4Ω (Pre-Installed)
- 1 x V8 Baby T8 Coil 0.15Ω
- Spare Parts
- 1 x Micro USB Cable
- 1 x User Manual
1- These Coils are designed for High VG Eliquids. If your eliquid contains less than 60% VG you will have leaking problems, please purchase accordingly.
2- You must prime your coil prior to use to ensure you do not burn the cotton in the coil.
3- Always use batteries in pairs – same brand, mAh, and amp limit
4- This is an advanced Item. Please use at your own risk and always use proper precautions and handling. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance.
5- We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
6- Please note that we do not recommend using the built-in USB charging feature on mods that use replaceable lithium ion cells. Lithium ion batteries must be balance charged using a good quality external battery charger to avoid damaging the cells and to reduce the risk of venting. Micro and mini USB ports are notoriously fragile and as such we do not offer a warranty on any USB charging ports if you choose to ignore this warning.
Please Note: The tank in this kit and coils are a classed as consumable items, as such they do not carry a warranty.