AVS is a mission driven company with a goal to help adult smokers find a better alternative. We understand that everyone’s needs are different and we want our customers to have an informed and positive vaping experience.
Information
Categories
Profile PS Dual Mesh RDA
Wotofo
- Choose Between Parallel or Series Builds
- 3mL Capacity
- Recommended Wattage: 75W – 85W
- Squonk or Drip
Add to Wishlist
Add to Wishlist
The new Profile PS Dual Mesh RDA By Wotofo and MrJustRight1, is a collaboration that brings you an even more flavourful vaping experience and the capability to switch your parallel deck into a series deck with an advanced mesh build.
Imagine getting four times the resistance from the same build on a parallel deck. Here’s a quick look at the math to help you understand.
- Take a single coil with a resistance rating of X ohms.
- The final resistance rating of dual coils in a parallel build will be X/2 ohm.
- The final resistance rating of dual coils in a series build will be X*2 ohm.
The Profile PS Dual Mesh RDA effectively lets you choose between parallel or series builds with dual mesh coils within one deck by a simple switch of the pin.
The Wotofo Profile PS Dual Mesh RDA comes with a default parallel deck. Converting it into a series deck requires a few simple steps:
- Remove the contact pins
- Find the converter pin
- Install it into the deck to replace the contact pins
And you’re good to go.
The best part about the Profile PS Dual Mesh RDA is that all the original Profile RDA meshes can work with this new RDA. A new mesh design specifically for the Profile PS is also a part of the family, allowing you to use it for the Wotofo Profile PS Dual Mesh RDA.
Wick and wire are found here.
Specific Mesh Strips for The Tank found here.
FEATURES & SPECS:
- 1 x RDA (Dual Mesh)
- Size: 35.5mm (H) x 28.5mm (D)
- Body Material: Stainless Steel
- Capacity: 3mL
- Wattage Range: 60W – 90W
- Recommended Wattage: 75W – 85W
- Squonk or Drip
- Adjustable Side Airflow – Honeycomb
- 810 Resin Drip Tip
- Coil Configuration: Dual Mesh in Parallel or Series
- Included Mesh Resistance: 0.30ohm
– series build: 0.60ohm; parallel build: 0.15ohm - Insulator Material: German PEEK
- Threading: 510 Thread
KIT INCLUDES:
- 1 x Profile PS Dual Mesh RDA
- 2 x 0.3Ω Mesh
- 2 x 6mm Thick Cotton Strip
- 1 x Bending Tool
- 1 x Cross Head Screwdriver
- 1 x Allen Key
- 1 x Accessory Bag
- 1 x User Manual
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
