Hellvape Dead Rabbit 24mm RDA

Hellvape Dead Rabbit RDA

The HellVape Dead Rabbit RDA is made in the USA, utilizing the creative designs from respected vape reviewer, Vapin’ Heathen and the manufacturing prowess of HellVape.  The Dead Rabbit RDA measures 24mm in diameter and features an elevated “postless” quad terminal build deck with diagonal dual slotted top-side airflow design.

The top terminal four post build deck is fully elevated to create spacious building and wicking area and takes the guesswork out of pre-cutting your coil leads.  The implementation of knurled top cap provides additional flair to the structure, while offering the convenient functionality of throttle to the dual slotted top-side airflow. The adjustable top side diagonal airflow focuses on flavour and minimizes e-juice leaking.

The terminal openings measure 2.5mm in diameter to accommodate large wires. The entire deck is connected with a PEEK-insulated block for a heat resistant foundation with the positive posts gold-plated for strong conductivity in order to run high powered configurations.

You can build either single or dual coil with it. The Dead Rabbit RDA also has a squonk pin so that you can use it with a squonk MOD.

**Please Note: The color of the drip tips are randomly prepackaged from the manufacturer. You can not choose a drip tip color. Photos are for reference only and are not representative of the drip tip variances of each unit.

Features and Specs:

• 24mm rda with ample build space and generous post holes
• 5mm Deep Juice Well
• Double O-Ring Secured
• PEEK Insulator
• 10mm Wide Bore 810 Resin Drip Tip
• Gold Plated 510 Connection
• Gold Plated Bottom Feed Pin
• 304 Stainless Steel Construction
• 24mm Diameter Top Terminal Four Post Build Deck
• Gold Plated Positive Posts
• Single Terminal Per Post Single or Dual Coil Options
• 2.5mm Terminals Per Post
• Side Mounted Hex Screws or Side Mounted Flathead Screws
• Top Side Diagonal Adjustable Airflow 10mm by 2.5mm Each Airslot
• Single or Dual Coil Options
• Minimizes Leaking
• Fully Closeable
• Knurled Grip To Adjust Airflow With Ease
• Squonk Ready

This Kit Comes With:

• 1 x Hellvape Dead Rabbit 24mm RDA
• 1 x 10mm Wide Bore 810 Resin Drip Tip
• 1 x 10mm Wide Bore 810 Delrin Drip Tip
• 1 x 510 Drip Tip Adapter
• Spare Parts Pack
• 1 x Gold Plated Bottom Feed Pin
• 1 x Allen Key

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

AustralianVaping Supplies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.