Same Day Dispatch on Orders Placed by 11:30am

Generic filters
Exact matches only

Geekvape 521 Tab Mini Ohm Meter


Availability: In stock

or 6 weekly interest-free payments from $4.99 with Laybuy what's this?

Add to Wishlist
Add to Wishlist

Availability: In stock

SKU GVMINI-521 Categories , Tag

The GeekVape 521 Tab Mini is designed to increase the degree of safety and avoid building a dangerous coil for the mod you are using. A fully integrated digital ohm meter and volt meter provides accurate readings with just the flip of a switch. The Geek Vape 521 Tab Mini reads all the way down to 0.01Ω and up to 9.9Ω.

Along with the ohm reader, the 521 Tab also features a firing button to help avoid from switching back and for from ohm reader to mod. It’s sleek and minimalistic design keeps simplicity in mind but also proves to be a fully functional accessory to any builder. Requiring (1) 18650 battery (batteries sold separately), the mini differs from the original size in the aspect that batteries can now be charged via micro USB located on the side of the unit as well as a battery level indicator on the LED display for more convenience.

Main Features:
Input voltage: 2.7 – 4.2V
Output voltage: 1.8 – 4.2V
Burning protection: 14.5 – 15.5S
Output wattage: 31 – 33W
Resistance measuring range: 0.01 – 9.9 ohm
Lowest resistance rate: 0.1 ohm
Connection: spring loaded 510 pin
Battery type: lithium 18650, 3.7V ( not included )
Coil resistance meter
Dry burn DIY coils
Reverse battery, low-voltage, breaker, high temperature and short circuit protection
Rechargeable via USB port
Compact and mini size
Low resistance
Coil resistance and battery level on screen
Available for dry burning
Material: aluminum alloy

OFF – turn off
Fire ( switch button ) – burning mode
Press “fire” to dry burn coil
Ohm reader – resistance measuring mode

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Thank you. Enjoy your Discount.

Use the Coupon Code:


At Checkout for $10 Off