The Dovpo Topside Dual 200W Squonk Mod is an updated version of the original TOPSIDE squonk mod, offering more power and battery life than its predecessor. Designed in collaboration with Vapor Chronicles, the Topside Dual presents a polished dual 18650 platform (batteries sold seperately), whilst including an upgraded power chipset!
The new intelligent chipset now has a new maximum output of 200W and 12 Volts and features a minimum atomizer resistance of 0.08ohm to power a full range of squonk RDAs in the market. The Topside Dual features a large and vibrant 5 line 0.96″ OLED display screen which can be hidden by activating stealth mode. The Topside Dual also features a full temperature control suite, integrated protections, a 2A micro USB charging and data port, and three button control interface. It is also firmware upgradeable. With an atomizer resistance range of 0.08 ohm to 3.5 ohm, the TOPSIDE DUAL is ideal for both sub-ohm vaping and flavour chasing. The leak-resistant 510 base is useful in that it will not allow juice within the internals. Furthermore, the 510 base is gold-plated and spring-loaded for the best possible conductivity.
Dovpo have wisely chosen to retain the same easy squeeze 10ml bottle as the original Topside, and have integrated a new hot swap feature so you can quickly switch out flavours when you’re on the go. There are two squonk bottles included in the box so you can carry two flavours with you right away.
Renowned for its high-quality construction with intricate levels of craftsmanship, the DOVPO Vape Topside Dual 200W utilizes a combination of Zinc Alloy and Aluminum Alloy construction to create an ergonomic form factor. This is the ultimate in Dual Battery Squonking!
For ADVANCED USERS ONLY, with a knowledge of Ohm’s Law and Battery safety, only use quality hi-amp batteries such as Sony VTC4 or Sony VTC5a or Samsung 25R and 30Q found here
We recommend an external charger for optimal charging, found here.
Features and Specs:
- Designed by The Vapor Chronicles
- Unique Top-Fill Method – Convenient Squonk Bottle Refill
- Bottom-Loaded Hinged Battery Cover
- 10ml Capacity Squonk Bottle (Pre-installed)
- Dimensions: 88.5mm by 54mm by 42mm
- Wattage Output Range: 5-200W
- Voltage Output Range: 1.0-12V
- Resistance Range: 0.08-3ohm
- BYPASS Mode
- Temperature Control: Nickel 200 / Titanium / Stainless Steel / TCR
- Temperature Control Range: 100 – 315C / 200 – 600F
- Resistance Range: 0.08 – 3.0ohm
- Stealth Mode
- 0.96″ OLED Display Screen
- Requires (2) High Amp 18650 Batteries (Sold Separately)
- *External charger recommended for optimal charging*
- MicroUSB Port – 5V/2A
- Firmware Upgradeable
- Includes Replacement 10ml Squonk Bottle Kit
- Short Circuit Protection
- Low Voltage Protection
- Gold Plated Spring Loaded 510 Contact Pin
- Leak Resistant 510 Base
- Stainless Steel, Zinc, & Aluminum Alloy Construction
- TOPSIDE DUAL Squonk Mod
- 2 10mL Squonk Bottle
- 1 Accessory Bag
- 1 MicroUSB Cable
- 1 Battery Usage Warning Card
- 1 Instructional Manual
1- This is an advanced Item. Please use at your own risk and always use proper precautions and handling. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance.
2- We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
3- Please note that we do not recommend using the built-in USB charging feature on mods that use replaceable lithium ion cells. Lithium ion batteries must be balance charged using a good quality external battery charger to avoid damaging the cells and to reduce the risk of venting. Micro and mini USB ports are notoriously fragile and as such we do not offer a warranty on any USB charging ports if you choose to ignore this warning.
4 – This product is for advanced users only. There is a risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have researched this product and how to use it before purchasing.
5 – We strongly recommend testing the coils with a ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.